Lincoln Air Vantage 500 Direct Drive

Lincoln Air Vantage 500 (Direct Drive)

Special refurbishment notes:

All engines fitted with new billet cam shaft, new front pulley seal and sand blasted/painted. Most machines have the upgraded EXTENDED hardened compressor shaft and matching PTO (Pictured).

Scope of refurbishment includes:

• Fully dismantle machine, remove all hardware/engine/generator from base assembly.
• Send engine away for billet cam shaft replacement, new pulley seal and painting.
• Removal of compressor and inspect PTO, if any wear on compressor shaft or PTO is present at all then the longer hardened upgrade is carried out (Ask if upgrade completed)
• Sand blasting of base assembly and repair where required. Sand blasting of external black panels.
• Prime and powder coat of external black panels (Internal and external)
• Polishing of stainless panels and replacement where required with new.
• Inspection of engine mounts and replacement where required.
• Remove radiator, send away for refurbishment. (Pressure test, flush and paint)
• Fully flush fuel tank and replace inlet and outlet gromets.
• Remove and check fuel sender and replace where required.
• MEG Check (Insulation test to 500V) Rotor and stator assembly.
• Replacement of rotor bearing upon assembly.
• New Brush Gear and clean slip rings.
• New excitation rectifier.
• All new decals including control panel, danger decals and canopy decals.
• New weld output decal including serial number printed.
• Inspection of weld rectifier and replacement where required.
• Dismantle, clean and refit all chopper, choke and rectifier connections.
• New 12V battery.
• New Fan belt.
• Engine fully serviced (Engine oil, oil filter, fuel filter, fuel separator and air filter)
• Compressor fully serviced (Compressor oil, oil filter, Air/Oil separator and air filter)
• New Schneider 15A socket outlets and New RCD.
• New 16v VRD globes.
• Load testing of weld output at 500A for 30 minutes and confirm that choppers have balanced loading.
• 100% functionally tested with certificate provided.
• 3-month parts and labour warranty provided with option of extended warranty

Machines can also be made to a desired specification including.

• BMA or standard mine spec.
• Galvanised frame and drip tray.
• Battery and starter isolators.
• Weld leads.
• LN25 Wire feeder.
• Gouging torch.

Please call or email for price, availability, and engine hours.